(Your shopping cart is empty)

Join our mailing list!

Destination Paint
350 East New York Street
Indianapolis, IN 46204

Email Us!

  Home > Benjamin Moore Exterior Paint >

  Benjamin Moore MoorGard Latex House Paint Low Lustre N103

Benjamin Moore MoorGard Latex House Paint Low Lustre N103
Benjamin Moore MoorGard Latex House Paint Low Lustre N103

Alternative Views:

Click Here For The Benjamin Moore Color Selector.
Gallon Price: $47.99

Manfacturer: Benjamin Moore
Model Number: N103

Stock Status:(Out of Stock)

Availability: Discontinued. Out Of Stock.
Product Code: N103

Color To Match

Color Name or Fandeck #*:

Who Makes That Color?

Company Name*:

Which Room?

Room Name*:

Container Size

Container Size*:

Benjamin Moore MoorGard Latex House Paint Low Lustre N103 is a premium quality, 100% acrylic exterior latex house paint in a popular low lustre finish. Benjamin Moore's latest technological improvement, using 100% acrylic resin and proprietary alkyd technology, provides a protective exterior coating that will remain looking freshly painted years after the job is finished. This high solids formula is suitable for a variety of exterior surfaces and can be applied at a wider temperature range.

Colors Available: Benjamin Moore® Color Preview® Bases, White, Brilliant White, Cottage Red, Country Redwood, Richmond Bisque, Tudor Brown, Charleston Brown, Platinum Gray, Navajo, Briarwood, Black
Gloss: Low Lustre
Cleanup: Water
Resin Type: 100% Acrylic Latex
Recommended Use: Exterior
Recommended For: Destination Paint recommends
Benjamin Moore MoorGard Latex House Paint Low Lustre N103 for exterior use on primed or previously painted wood siding, trim, doors, sash, shingles; cured or previously painted masonry such as stucco, cement block construction, poured and precast concrete, unglazed brick, aluminum, vinyl, or site-primed hardboard siding; and previously painted or primed metal.

Surface Preparation

Surfaces must be clean and free of grease, wax, and mildew. Remove excessive chalk and loose or scaling paint. If previously coated with cement-base water paints, clean by sandblasting. Glossy surfaces must be dulled. Un-weathered areas such as eaves, ceilings, and overhangs should be washed with a detergent solution and/or rinsed with a strong stream of water from a garden hose to remove contaminants that can interfere with proper adhesion. Mildew must be removed by application of Benjamin Moore CLEAN 318. Caution: Use rubber gloves, work goggles, and protective clothing. For metal surfaces, remove rust. Wipe down with paint thinner to remove surface oils.

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Carefully clean up with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.


Thinning is unnecessary, but if required to obtain desired application properties, a small amount of clean water may be added. Never add other paints or solvents. Clean up with warm soapy water. Brushes should be given an additional quick rinse with mineral spirits followed by a second wash in soapy water, then rinsed thoroughly. Spray equipment should be given a final rinse with mineral spirits to prevent rusting.

USE COMPLETELY OR DISPOSE OF PROPERLY. Dry, empty containers may be recycled in a can recycling program. Local disposal requirements vary, consult your sanitation department or state-designated environmental agency on disposal options.

Environmental, Health & Safety Information

Contains Crystalline Silica that can cause cancer when in the respirable form (spray mist or sanding dust).
Use only with adequate ventilation. Do not breathe spray mist or sanding dust. Ensure fresh air entry during application and drying. Avoid contact with eyes and prolonged or repeated contact with skin. Avoid exposure to dust and spray mist by wearing a NIOSH approved respirator during application, sanding and clean up. Follow respirator manufacturer’s directions for respirator use. Close container after each use. Wash thoroughly after handling.

FIRST AID: In case of eye contact, flush with water for 15 minutes; for skin, wash with soap and water. If you experience difficulty breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

IN CASE OF SPILL: Absorb with inert material and dispose of as specified under Thinning/Cleanup.

Refer to Material Safety Data Sheet for additional health and safety information.

Material Safety Data Sheet (MSDS):
MSDS N103 English
MSDS N103 Español

Technical Data Sheet (TDS):
TDS N103 English
Features At A Glance

Benjamin Moore MoorGard Latex House Paint Low Lustre N103
  • Outstanding hiding
  • Covers in one coat provided the surface is in good condition and the color change is not extreme
  • Superior adhesion and excellent resistance to chalking
  • Delivers a high-build paint film for excellent durability and long lasting protection
  • Lifetime warranty (see label for details)
  • Excellent uniformity and touch up
  • Easy to apply with brush, roller or spray
  • Soap and water clean up
  • Dries quickly
  • Resistant to fading, cracking, peeling, blistering, dirt pick-up, alkali and fumes
  • Mildew resistant - Benjamin Moore MoorGard Latex House Paint Low Lustre N103 is specially formulated with agents that inhibit the growth of mildew on the surface of the paint film
  • Low temperature application

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Benjamin Moore Exterior Paint
Finish > Low Lustre