(Your shopping cart is empty)






Join our mailing list!



Destination Paint
350 East New York Street
Indianapolis, IN 46204
USA
317-636-7353

Email Us!


  Home > Benjamin Moore Aura Paint >

Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634

Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634
Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634


 
Alternative Views:


Click Here For The Benjamin Moore Color Selector.
Gallon Price: $61.99

Manfacturer: Benjamin Moore
Model Number: 634

Stock Status:In Stock

Availability: Usually Leaves Our Facility In 5 to 7 Business Days.
Product Code: 634

Color To Match

Color Name or Fandeck #*:

Who Makes That Color?

Company Name*:

Which Room?

Room Name*:

Container Size

Container Size*:
  

Qty:  
Description
 
Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634 in a super premium quality, 100% acrylic exterior low lustre latex finish. Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634 combines the advantages of Benjamin Moore's latest resin technology and their proprietary GENNEX® colorant system to provide the ultimate exterior coating. This high solids formula is suitable for a variety of exterior surfaces and can be applied as low as 40° F. Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634 is suitable for wind driven rain when applied according to recommendations.

Colors Available: White, Benjamin Moore® GENNEX® Tint Bases: bases 1X, 2X, 3X & 4X
 
Gloss: Low Lustre
 
Cleanup: Water
 
Resin Type: 100% Acrylic Latex
 
Recommended Use: Exterior
 
Recommended For: Destination Paint recommends Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634 for exterior use on a variety of outdoor surfaces, including wood, fiber cement board, hard board, vinyl and aluminum siding, and shakes. Ideal for use on unglazed brick, concrete, stucco, cinder block and primed metal.
 
Additional Information: See additional Aura application instructions linked below.
Aura Exterior Spray Instructions

Surface Preparation
Surfaces must be clean and free of grease, wax, and mildew. Remove any chalk and loose or scaling paint. If previously coated with cement-base waterproofing paints, clean by sandblasting. Glossy surfaces must be dulled. Unweathered areas such as eaves, ceilings, and overhangs should be washed with a detergent solution and/or rinsed with a strong stream of water from a garden hose to remove contaminants that can interfere with proper adhesion. Mildew must be removed by application of BENJAMIN MOORE CLEAN 318.

Caution: Use rubber gloves, work goggles, and protective clothing. For metal surfaces, remove rust. Wipe down with paint thinner to remove surface oils.

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.

Wear a NIOSH-approved respirator to control lead exposure. Carefully clean up with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

Difficult Substrates: Benjamin Moore offers a number of specialty primers for use over difficult substrates such as bleeding woods, grease stains, crayon markings, hard glossy surfaces, or other substrates where paint adhesion or stain suppression is a particular problem. Destination Paint can recommend the right problem-solving primer for your special needs.

Application
Use the same application techniques as you would for any low-VOC compliant coating. Use a Benjamin Moore premium roller or premium extra firm nylon polyester brush for best results. Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634 features excellent flow and leveling; it’s not necessary to over brush to smooth out brush marks. Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634 dries faster than other acrylic paints; avoid lap marks by not painting in direct sunlight and by coating sections of the surface either down or across the structure to natural breaks, maintaining a wet edge. If your edge begins to dry or you see that you missed a spot and the paint is already setting up, allow it to dry completely before touching up that area.

This product can also be sprayed.


  Mild conditionsSevere conditions
  Humid (RH> 50%) with no direct sunlight & with little to no wind Dry (RH<50%), in direct sunlight,
or windy conditions
Brush: Nylon / Polyester

Roller:
Aura Roller Cover

Spray: Airless
Pressure:
1500 -2500 psi
Tip: 0.013-0.017



 No thinning
necessary
 Add 518 Extender or water:

Max of 8 fl. oz. to a gallon paint

Never add other paints or solvents.
* Under normal application conditions, Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634 may be sprayed to achieve a high build one coat system over properly prepared substrates that are in good condition. Refer to Surface Preparation & Priming Sections for appropriate priming and preparation information.

High Build System Coverage: 160 – 265 sq. ft. 6-10 mils wet film thickness.

Thinning/Cleanup
Cleanup: Wash brushes, rollers, and other painting tools in warm soapy water immediately after use. Spray equipment should be given a final rinse with mineral spirits to prevent rusting. USE COMPLETELY OR DISPOSE OF PROPERLY. Dry, empty containers may be recycled in a can recycling program. Local disposal requirements vary; consult your sanitation department or state-designated environmental agency on disposal options.

Environmental, Health & Safety Information
Use only with adequate ventilation. Do not breathe spray mist or sanding dust. Ensure fresh air entry during application and drying. Avoid contact with eyes and prolonged or repeated contact with skin. Avoid exposure to dust and spray mist by wearing a NIOSH approved respirator during application, sanding and clean up. Follow respirator manufacturer’s directions for respirator use. Close container after each use. Wash thoroughly after handling.

FIRST AID
Eye Contact: Flush immediately with plenty of water for at least 15 minutes.
Skin Contact: Wash thoroughly with soap and water. If symptoms persist, seek medical attention. If you experience difficulty breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

IN CASE OF SPILL: Absorb with inert material and dispose of as specified under Thinning/Cleanup.

KEEP OUT OF REACH OF CHILDREN
PROTECT FROM FREEZING
Refer to Material Safety Data Sheet for additional health and safety information.

Material Safety Data Sheet (MSDS):
MSDS 634 English
MSDS 634 Español

 
Technical Data Sheet (TDS):
TDS 634 English
Features At A Glance
Benjamin Moore Aura Waterborne Exterior Paint Low Lustre 634
  • Extreme hide, never more than 2 coats in any color
  • Uses Benjamin Moore's Color Lock® Technology
  • Low temperature application and greatly improved resistance to surfactant leaching in dark colors
  • Superior adhesion and excellent resistance to chalking
  • Delivers a high-build paint film for excellent durability and long lasting protection
  • Easy to apply with brush, roller or sprayer
  • Soap and water clean up
  • Fast dry and re-coat times
  • Resistant to fading, cracking, peeling, blistering, dirt pick-up
  • Provides a mildew resistant film
  • Self priming in most situations

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Benjamin Moore Aura Paint
Benjamin Moore Aura Paint > Benjamin Moore Aura Exterior Paint
Finish > Low Lustre
SSL